series-hybrid
series-hybrid t1_isb3ghq wrote
Reply to comment by Buchaven in Trimming hardened linear shafts by Patex_
Well done! No circumcision is complete until the deburring is done.
series-hybrid t1_isap8r3 wrote
Reply to comment by paulmarchant in Trimming hardened linear shafts by Patex_
Good point. Sparks actually do damage...
series-hybrid t1_isa8x25 wrote
Reply to comment by MmmPeopleBacon in Trimming hardened linear shafts by Patex_
Thanks!
series-hybrid t1_isa7ts5 wrote
Reply to Trimming hardened linear shafts by Patex_
wrap a wet cloth near the cut to wick heat away, on both sides of the cut. A thin abrasive disc in an angle-grinder is exactly the tool. Stop often to let it cool.
series-hybrid t1_ir65ydg wrote
Reply to comment by barrel-getya in Can i use 3 in 1 brand all temp fluid to lubricate drill bits when drilling (steel?) hinges? by drummerene
I dont know whats in tap magic, but I worked for a while in a shop that always had a can next to the drill press.
The holes got drilled faster, and the drill bits lasted longer. Don't ask me how.
series-hybrid t1_ir65oo4 wrote
Reply to comment by robm111 in Can i use 3 in 1 brand all temp fluid to lubricate drill bits when drilling (steel?) hinges? by drummerene
"The word Windex come from the Greek winopolous and dexopilae, meaning wipe and clean...you are too skinny, you need to eat more!"
series-hybrid t1_ir656t1 wrote
Reply to comment by exiestjw in Can i use 3 in 1 brand all temp fluid to lubricate drill bits when drilling (steel?) hinges? by drummerene
Its learning from other peoples mistakes, and understanding when to be careful enough, and when you can get away with hot-dogging it.
You get good judgment from experience, and you get experience from bad judgment.
series-hybrid t1_isf3lw6 wrote
Reply to comment by Lightingcap in Trimming hardened linear shafts by Patex_
I agree, good point (PS, I have scars)