Hack-of-all-trades61
Hack-of-all-trades61 t1_jdfsmba wrote
Our hot tub has a 60amp GFCI, which is the manufacturer spec. The wires are in waterproof conduit.
Square D is available on Amazon for $95.
Home Depot offers the Square D in a outside panel for $136.
Note the mfg spec called for a disconnect box viewable from the spa and at least 5’ away from the spa. The outdoor panel can work for this.
Hack-of-all-trades61 t1_ja7ecvu wrote
Reply to How to install drywall around door? by Kitchen_Ad2981
Appears to be a very old garage. Could be the framing is a full 4” and a standard “4-inch” door was too small. That would explain why a 6” door sticks out 1.5”. I can think of 2 reasonable options.
-
remove the door frame and disassemble it. Trim off the excess 1” from the outside edge- furthest from the hinge cutouts. Reassemble and reinstall. Maybe that’s not so reasonable after all.
-
it looks like there’s enough room between the door and the light switch to simply box it out. Rip a stud to the desired thickness. 1” if it’s 1.5 out. Screw it to the stud closest to the frame, add from the frame into it. (This will make your door more secure. As it is, a not very hard kick is splitting the door frame open.) then drywall a funny-looking corner. If you can’t find skinny enough door trim- rip that as well.
Hack-of-all-trades61 t1_jdfx91v wrote
Reply to comment by Hack-of-all-trades61 in 240v 50-60 amp AFCI/GFCI breaker. by CardBoardBoxProcessr
That’s more than the first one I saw, but that one is described as 60a, but the pic shows 15a